Universal Silicone-based Release Agent for Processing Thermoplastic Resins & Elastomers
Benefits
• Suitable for mould temperatures up to 150 °C (302 °F)
• Easy and multiple de-moulding
• Wide range of application
• Can also be used as a lubricant
Description
Lusin® Alro OL 153 S is a universal release agent for the de-moulding of thermoplastic, thermoset and elastomeric parts up to a mould temperature of 150 °C (302 °F).
It is also suitable as a lubricating agent with improved anti-friction properties.
Lusin® Alro OL 153 S is based on non-reactive silicone oils which are absolutely colourless and have no smell.
Typical Properties
Appearance of the active ingredient: Liquid, colourless
Application
A fine even spray film should be applied to the clean mould, especially to edges and undercuts.
For cleaning, it is recommended to use Lusin® L 23 F or Lusin® MC1718 as a mould cleaning agent and Lusin® Clean L 11 or Lusin® Clean L 51 as a degreasing agent.
Note: In terms of post treatment of the produced parts we do not recommend the use of Lusin® Alro OL 153 S.
The high de-moulding and wetting properties (even in low concentrations) will cause surface defects of the post treatment agent.
Packaging
Aerosol: 400 ml with 12 cans per box
Bulk: 20 l, 200 l
