INNOVATIVE WASHING
Our washing system designed for textile waste is a major innovation for the recycling industry. The configuration of a washing line for textile waste can be very different depending on the type of material to be recovered
Washing plants are divided into several stages, depending on the characteristics of the input material. In general, textile waste plants designed by Recy Technologies are divided into several main stages:
Selection and grinding
This stage is designed and carried out with special care as it is essential to carry out careful selection, either manual or automatic, and excellent grinding to ensure optimum operation of the entire line and excellent final product quality.
This processing cycle consists of robust and easy-to-maintain machines capable of processing difficult materials with high contamination rates, and the composition of the machinery depends on the type of input material.
Prewashing and washing
Our systems are customized and can include water or dry prewashing and cold or hot washing, depending on the type and quality of the material. In this way, we are able to ensure excellent washing and greater energy efficiency and lower water consumption.
Our innovative hot washing system self-generates heat and does not require heating systems for water and steam generation, with associated electrical costs and maintenance problems. It is, moreover, capable of removing all kinds of impurities and printing inks, which is essential for obtaining the highest quality granule. Unlike conventional plants, an additional feature we are deeply proud of is our ability to obtain an odor-free ground and/or final granule without the need for additional chemical additives to remove odor.
Drying and granulation
The machinery present at this stage of processing is designed with extreme care in order to remove most of the water content left in the product, reaching a moisture content of less than 1 percent. In this way, we are able to minimize subsequent energy and operational costs during the granulation phrase.
Due to the very low moisture content, we are able to perform excellent homogenization and granulation through single-screw or twin-screw systems up to 4 degassings.
From the waste, we can provide a suitable granule to make various finished products. We have unique technologies that allow us to make endless transformations with any kind of waste.
