Cleaning Agents and Degreasers
Powerfully Attack BuildupOver time, contaminants can accumulate on mould surfaces, causing defective parts and damage to themould.
Lusin® cleaning agents and degreasers safely and effectively remove resins, colours, additives,waxes, oils, grease and most types of polymer residues for better surface quality andimproved start-up procedures. Available in aerosol cans for precise spray applications.
LUSIN® MC1718 Cleaning Agent Based on Organic Solvents
- Removes polymer residues
- Has a rapid cleaning effect
Lusin® MC1718 is an organic cleaning agent that isespecially suitable for removing tenacious resin and otherresidues from metal surfaces.
Boiling Point (aerosol): < -10 °C (14 °F)
Density (active ingredient): < 1,0 g/cm3
Lusin® MC1718 is used for the cleaning of dirty mouldsand for dissolving polymer residues (e.g., PVC, POM,polyamides, acrylates, etc.).
Spray Lusin® MC1718 on contaminated moulds, allow theproduct to react and then remove it by producing parts(they will initially show affected surfaces). The productcan also be removed by using a cloth wipe.
If required, the procedure can be repeated several timesat increased temperatures and longer reaction time(1 hour maximum).
In case of production stoppage, after having cleaned thesurface with Lusin® MC1718, a mould protectant (anticorrosionagent) like Lusin® Protect G 31 F (if NSF compliance is required)should be applied; in all other cases Lusin® Protect G 31or Lusin® Protect G 11 can be used.
Lusin® MC1718 attacks plastic and paint surfaces.
Packaging - Aerosol
400 ml with 12 cans per box